Stihl MS440 Chainsaw Review 2024 Specs, Price, Parts, Versions

Ms440 Stihl. Stihl MS440 Chainsaw Review 2024 Specs, Price, Parts, Versions Page 46 Decoke after first 139 hours of operation, then Exhaust port every 150 hours of operation Safety labels Replace STIHL recommends a STIHL servicing dealer Firmly tighten down the cylinder base screws of professional saws (3.4 kW or more) after 10 to 20 hours of operation Think of the MS440 as the squeeze bottle and the MS440 Magnum as that wide mouth jar

Stihl MS440 Chainsaw 25” Bertie Green
Stihl MS440 Chainsaw 25” Bertie Green from bertiegreen.co.uk

With its robust construction and high-quality materials, this chainsaw is built to withstand heavy-duty tasks and prolonged use Mechanically both versions are the same except the airflow and jetting delivers the power differently so that the torque-available figures come up earlier.

Stihl MS440 Chainsaw 25” Bertie Green

Type: Electronic magneto ignition (breakerless) with integral trigger unit Air gap: 0.15 - 0.3 mm Page 46 Decoke after first 139 hours of operation, then Exhaust port every 150 hours of operation Safety labels Replace STIHL recommends a STIHL servicing dealer Firmly tighten down the cylinder base screws of professional saws (3.4 kW or more) after 10 to 20 hours of operation The MS 440 is equipped with a powerful engine that delivers impressive cutting power.

STIHL MS440 with 26 inch Bar *Very Tidy Saw* Chainsaw Parts World. Page 46 Decoke after first 139 hours of operation, then Exhaust port every 150 hours of operation Safety labels Replace STIHL recommends a STIHL servicing dealer Firmly tighten down the cylinder base screws of professional saws (3.4 kW or more) after 10 to 20 hours of operation Mix ratio: 50:1 with STIHL two-stroke engine oil, 25:1 with other brand name two-stroke, air-cooled engine oils Air filter:Box filter, fabric or fleece filter

SOLD!!!! STIHL MS440. Select a page from the Stihl MS 440 Chainsaw diagram to view the parts list and exploded view diagram Mechanically both versions are the same except the airflow and jetting delivers the power differently so that the torque-available figures come up earlier.